VOLUX expands static wash lineup with RBGALC powered CuePar X series

FORT LAUDERDALE, FL – Volux has recently expanded its static wash light offerings with the introduction of the new Lime-integrated CUEPAR X series.

The CUEPAR X series features 20-watt 6-in-1 RGBALC (Red, Green, Blue, Amber, Lime, Cyan) LEDs. Embracing the proven advantages Lime chips offer to the primary Red, Green, and Blue colors. In addition to Lime, however, dedicated Amber and Cyan chips are also integrated to further expand its color mixing capabilities. This results in high color fidelity with expansive CCT control and deeply saturated colors that maintain impressive output across the color spectrum.

CUEPAR X series’ expansive color mixing can be easily accessed with a virtual gel swatch book and offers expanded variable white color temperature control ranging from 2,000 – 10,000K thanks to the addition of amber and cyan chips. CUEPAR X series is camera-ready with user-selectable PWM rates and offers ultra-smooth 16-bit linear dimming with 4 dimming curves, plus electronic strobe FX.

Uniform optics are key with CUEPAR X series. All models come standard with a 25-degree beam angle and a 40-degree field angle. Giving those sleek uplight looks but also delivering even, uniform wash dispersement when needed.  An optional lens diffuser can increase the beam angle to 60° and field angle to 70°.

The CUEPAR X series is introduced in two models. CUEPAR X2 which features 7 x 20W LED chips with an output of 4,400 lumens. CUEPAR X1B is battery powered featuring 4 x 20W LED chips with an output of 2,700 Lumens. CUEPAR X1B marks Volux’s first true battery-powered solution. It offers user-selectable runtimes up to 18 hours with quick recharging capabilities and maintains a similar form factor to CUEPAR X2 with true1 compatible power in/thru connections for hardwired AC operation seamlessly. CUEPAR X1B additionally offers an emergency mode that changes its color to full white in the event it detects a power loss while operating on AC power.

Control options are flexible with CUEPAR X series. Both models integrate 5-pin DMX in/thru connections for hardline DMX connections and come standard with a W-DMX / CRMX wireless transceiver integrated into the fixture for complete, wireless control. A dedicated 2.4Ghz wireless protocol is offered for stand-alone wireless master/slave operation, which can control either model variant within the same interlink since all CuePar X models use the same channel personalities.

All of these features are housed in an IP65-rated weatherproof housing that is completely fan-less for silent operation. The exterior housing incorporates heat sinks to improve heat management which is critical to maintaining LED lifespan and color shift from age. Both models are extremely lightweight each weighing less than 10 lbs. CUEPAR X features a self-standing adjustable yoke base with quarter-turn lock sockets for an omega bracket as well as an M10 hole for direct clamp installation. A traditional folding Y-yoke is available upon special request.

The CUEPAR X series was designed to deliver the ideal balance of ruggedness, high color reproduction, brightness, and flexibility in a unified form factor that is lightweight and embraces LED stability.

Both CUEPAR X1B and CUEPAR X2 will be shipping from beginning Q3 2024 from VOLUX USA and authorized dealers.

For more information visit www.voluxlighting.com

Share This

Copy Link to Clipboard

Copy